Silicon Graphics 230, User Manual

Page: 126 / 148

110 007-4263-001
4: Setup Utility
Exit Setup
Examine the system configuration values. When you are satisfied that all the values are
correct, write them down. Store the recorded values in a safe place. In the future, if the
battery loses power or the CMOS chip is damaged, you will know what values to enter
when you rerun Setup.
Press the
Esc
key to leave the Setup utility. The following dialog box appears:
Figure 4-21 Exit Setup Screen
Use the arrow keys to select your response. Press the
Enter
key.
If you made any changes to the Setup utility, the following dialog box appears:
Figure 4-22 Save Settings Screen
Use the arrow keys to select your response. Select
Yes
to save the changes in CMOS.
Select
No
to retain the old configuration values. Press the
Enter
key to exit.