Silicon Graphics 230, User Manual

Page: 118 / 148

102 007-4263-001
4: Setup Utility
User Password
The
User Password
secures your system against unauthorized use. Once you set this
password, you have to type it whenever you boot the system. To set this password, enter
the Setup Utility, select System Security, and then highlight the
User Password
parameter. Follow the procedure used in “Supervisor Password” on page 99.
Figure 4-15 User Password Screen
Disk Drive Control
The disk drive control features allow you to control the floppy drive or the hard disk
drive boot function to prevent loading operating systems or other programs from a
certain drive while the other drives are operational (under DOS mode only).
Table 4-9 describes the Disk Drive Control settings.
Table 4-9 Disk Drive Control
Setting Description
Normal Floppy drive or hard disk drive functions normally
Write Protect All Sectors Disables the write function on all sectors
Write Protect Boot Sectors Disables the write function only on the boot sector