Silicon Graphics 230, User Manual

Page: 2 / 148

CONTRIBUTORS
Written by Olivier Clarinval
Chapters 3 and 4 provided by Acer Incorporated
Illustrated by Dan Young
Engineering contributions by Cullen P. Vane, Carlin Otto, Eric Zamost, Charles Alexander, Dariush Behroozi, Binh Dao, Paul Davison, Ujesh
Desai, Craig Dunwoody, Jose Luis Serrato, Anthony Than.
Cover Design By Sarah Bolles, Sarah Bolles Design, and Dany Galgani, SGI Technical Publications
© 2000, Silicon Graphics, Inc. All Rights Reserved.
LIMITED AND RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in the Rights in Data clause at FAR 52.227-14 and/or in
similar or successor clauses in the FAR, or in the DOD, DOE or NASA FAR Supplements. Unpublished rights reserved under the Copyright Laws
of the United States. Contractor/manufacturer is Silicon Graphics, Inc., 1600 Amphitheatre Pkwy., Mountain View, CA 94043-1351.
TRADEMARKS
Silicon Graphics is a registered trademark and SGI and the SGI logo are trademarks of Silicon Graphics, Inc. Pentium is a registered trademark
of Intel Corporation. Acer is a registered trademark of Acer Inc.
The contents of this document may not be copied or duplicated in any manner, in whole or in part, without the prior written permission of Silicon
Graphics, Inc.
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
For additional Regulatory Information, refer to the label attached to the back of the system.