REKORD
Operating manual - English
4
Copyright Silca 2 007
GENERAL INTRODUCTIONS
The REKORD key-cutting machine has been designed according to the specifications of the Machine
Directives. From the design stage risks for the operator have been eliminated in all areas: transport, key-
cutting, regulation and maintenance.
Other risks have been eliminated by the use of protective devices for the operator.
The protective devices used are designed not to provoke further risks and, above all, they cannot be
ignored unless deliberately cut out. They do not hinder visibility of the work area.
A special adhesive label is attached to th e machine warning the operator to use goggles during the
cutting operations, and this is strongly recommended in this manual.
The material used in the manufacture of this machine and the components employed during use of the
machine are not dangerous and their use complies with standards.
Use
The REKORD must be installed and used in the way laid down by the manufacturer.
If th e key-cuttin g ma chine is used differently or for purposes differ ent from those describe d in this
manual, the customer will forego any rights he may have over SILCA S.p.A. Furthermore, unforeseen
danger to the operator or any third parties may arise from incorrect use of the machine.
Negligence in the use of the machine or failure on the part of the operator to observe the instructions
given in this manual are not covered by the guarantee and the manufacturer declines all responsibility
in such cases.
It is therefore indispensable to read the operating manual carefully in order to make the best use
of the REKORD and benefit from its potential.
Instructions manual
The instructions manual provided with the machine is essential to its proper use and to carry out the
necessary maintenance.
We therefore recommend protecting the manual from damage in a safe sheltered place, easily to hand
for quick consultation.
Further Risks
There are no further risks arising from the use of the machine.
Protection and safety precautions for the operator
The REKORD key-cutting machine is built entirely to standards. The operations for which it has been
designed are easily carried out at no risk to the operator.
The a doption o f g eneral safety precautions (wearing pro tective gog gles) an d observatio n of the
instructions provided by the manufacturer in this manual eliminate all human error, unless deliberate.
The REKORD key-cutting mach ine is designed with features which make it completely safe in all its
parts.
•
Power supply
The key-cutting machine is powered by electricity supplied through a separable earthed plug.
•
Start-up
The machine is started up:
- Activating the safety main switch on the right-hand side of the machine.
- Activating the motor on switch the left-hand side.
•
Maintenance
The operations to regulate, service, repair and clean the machine have been devised in the simplest and
safest way possible. There is no danger of removable parts being re-placed wrongly or unsafely.
•
Machine Identification
The REKOR D key-cutting machine is provi ded w ith an iden tification la bel w hich show s the seria l
number (fig. 2).
Fig. 2
