Operating manual - English
REKORD
Copyright Silca 2 007
13
5.7
Description of work station
The key-cutting machine needs only one operator, who has the following controls at his/her disposal:
- Switch on the lamp by activating the main switch (O) located on the right-hand side of the machine.
- The motor on switch (N), located on the left-hand side of the machine has a warning light to show
that the key-cutting machine is live.
- Carriage movement lever (D)
- Carriage handle lever (A)
- Carriage release lever (B)
- Gauge knob (G).
Fig. 10
5.8
Graphics
A
B
D
N
G
THE USE OF
PROTECTIVE GOGGLES
IS COMPULSORY
ATTENTION
DANGEROUS
MOBILE PARTS
Place the adhesive label “Dangerous
mobile parts” (ch .4, p age 10 ) as
shown.
