5 CUTTING OPERATIONS
ATTENTION: for complete safety during the cutting operations, take the following precautions:
•
Always work with dry hands.
• Check that the machine is properly earthed.
• Wear protective goggles even if the machine has a protective shield over the cutting tool.
• Start the motor (switch K) only after completing the operations on the carriage (securing the keys,
etc..).
• Keep hands away from the cutting tool in motion.
5.1
Tilting carriage for rounding off key cuts
The carriage can be given a tilting movement for rounding off cuts.
• To activate the tilting movement: pull out the pin (D) and move handle (B) to round off the cuts.
• To deactivate the tilting movement: fi t the pin (D) into its seat so that the carriage is locked in a fi xed
horizontal position.
D
B
B
Fig. 20
Fig. 21
Operating manual
FASTBIT
Copyright Silca 2014
16
