6.5
Access to the lower compartment
ATTENTION: remove the mains plug.
1) Detach the wire from the key-cutting machine socket.
2) Remove the swarf tray (L) (Fig. 39).
3) Paying attention turn the machine slowly onto its back
.
4) Loosen the 3 screws (W1) and remove the plate (W) (Fig. 40).
L
W
W1
Fig. 39
Fig. 40
6.6 Replacing the main switch
ATTENTION: remove the mains plug.
1) Access the lower compartment (see chap. 6.5).
2) Detach the 4 connectors (H2) and (H3) paying special attention to their position (Fig. 41).
3) Remove the switch making pressure on the tabs with a screwdriver (Fig. 42).
4) Fit the new main switch.
5) Reconnect the 4 connectors (H2) and (H3).
Fig. 41
Fig. 42
Operating manual
FASTBIT
Copyright Silca 2014
25
