1 MACHINE
DESCRIPTION
FASTBIT is a professional key-cutting machine for bit, double bit, pump keys, mail box keys and special keys.
Fig. 3
The main parts of the machine are described below:
• Main
switch
The key-cutting machine is connected to a power socket provided with a differential switch; when the machine
is turned on by means of the switch (H) located on its right-hand side, the warning light (H1) comes on to show
that the machine is live.
ATTENTION: switch (H) is electromagnetic, in the event of a power failure it goes out automatically.
When electricity is restored it must be reset manually to power the machine again by means of the
plug.
• Motor start-up switch
On the left-hand side of the motor there is the motor start switch (K).
ATTENTION: the illuminated switch remains on to indicate that the key-cutting machine has been
started (cutter in motion).
• Motor and transmission unit
Motor transmission takes place by belt. On the right-hand side of the motor there is the transmission shaft which
moves the cutting tool (F) and the brush (S). These components are protected by:
-
cutting tool cover (N)
-
brush cover (P)
• Clamp
carriages
The horizontal carriage (C) controlled by lever (A) has a
handle (B) for front movement and holds 2 clamps (J).
The carriage is so designed as to avoid accumulation of
dust or cutting swarf.
The machine is designed with a ramp along which
chippings can fall into the special chippings tray (L) placed
under the carriage and easily removable for emptying and
cleaning.
Fig. 4
A
K
J1
B
J
E
G
D
H1
N
F
H
S
C
P
J1
L
Operating manual
FASTBIT
Copyright Silca 2014
4
