3.5.3 Fixing
bracket
The key-cutting machine can be fi xed to the work bench with the bracket provided. Follow the instructions below:
1) Turn off the machine and unplug from the mains.
2) Remove the two front feet.
3) Place the bracket as indicated in.
4) Screw the two feet into the bracket.
Fig. 13
3.6 Connection to the mains
For the safety of the operator and the machine it is important to ensure that the machine is connected to the
proper mains voltage
by means of an earthed differential switch
.
Operating manual
FASTBIT
Copyright Silca 2014
12
