Copyright 2018, SIGMAKOKI Co.,Ltd.
67
5-2.SHOT Mode
Because set all items by a number of the pulses unit in the case of open loop control of SHOT-Mode, in
the case of a Translation stage, there is not the difference. (Do not use Base Rate.)
5-2-1 Command/ Status
A command, M command: set a rotary angle with the integer of the 0.01 degrees unit.
The positional information that is sent back by Q command: send back a position at an angle of a 0.0001
degrees unit now.
[Example] When turn 45 degrees by M command, set it with M:1+P450000.
When it is sent back with 450000 by Q command, a position shows that it is 45.0000 degrees now.