Sigalarm WCM4.0, Installation And Operation Manual

Page: 19 / 36

19
SIGALARM INSTALLATION AND OPERATION MANUAL / GENERATION 4 WIRELESS
3.6 TOUCH SCREEN ICONS
3.7 BUTTONS AND KNOBS
Item Tool Bar Function
5 Override The override icon can be selected in a danger state. This
will put the unit in a warning state for 15 second count
down to allow the operator to move away from danger
*This is especially important when the auto shutdown
feature is utilized*
6 Decrease Decreases the set point
7 One touch Matches the set point to the current highest sensor
reading plus five
8 Increase Increases the set point
9 Reset After power is applied reverts unit to last setpoint
Item Button/knobs Function
8a + Increase set point
6a - Decrease set point
10 Enter N/A
9a Reset • After power is applied reverts unit to last set point.
• Depressing the reset button for 15 seconds will reboot
the system, known as a hard reset.