Page 30/44
2- 9.2 M7.2 - GSM Setup
POS.
NAME
DESCRIPTION
RANGE OF
VALUES
DEFAULT
SETTINGS
A
Modem status
Status of the modem: initial (initializing phase), wait (waiting), ready (stand-by
phase), send (sending a message), send wait (waiting the response).
-
-
B
APP enable
It enables the automatic status messages and alarm via SMS for SMS app or
standard mobile.
On-O
ff
O
ff
C
SMS filter (s)
Set the minimum time between two different SMS events to avoid to send many
messages in short period of time.
1-255 [s]
3
D 1-2
Generator Ok -
Engine running
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
O
ff
-On
E 1-2
Engine stopping -
Stopping ok
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
O
ff
-On
F 1-2
KG active -
KR active
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
On-On
G 1-2
Auto mode - Test
mode
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
On-O
ff
H 1-2
O
ff
mode - Man
mode
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
On-On
I 1-2
Ejp on - Mains
return
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
O
ff
-O
ff
J
Remote stop
If enabled, the activation of this condition will trigger a SMS info message
On-O
ff
On
K 1-2-3
Pw char 1-2-3
Set the 6 characters password code for SMS commands: if password is different
from 0-0-0-0-0-0, every SMS command received without the correct password code
will be discarded. The syntax to send the correct SMS with password is:
PWD=[XXXXXX] [Command]
For example if password is 1-0-2-A-z-X, the SMS command to start the engine must
be composed this way:
PWD=102AzX START
[0-9]
or
[A-Z]
or
[a-z]
0 - 0 - 0
L 1-2-3
Pw char 4-5-6
Set the other 3 characters for the password
[0-9]
or
[A-Z]
or
[a-z]
0 - 0 - 0
M
Call Numbers
It shows the mobile phone numbers set in position 1
-
-
N
Call Numbers
It shows the mobile phone numbers set in position 2
-
-
O
Call Numbers
It shows the mobile phone numbers set in position 3
-
-
P
Call Numbers
It shows the mobile phone numbers set in position 4
-
-
Q
Call Numbers
It shows the mobile phone numbers set in position 5
-
-
2- 9.2.1 - System info SMS message
SMS sent by remote device will be received by mobile device with the following format:
EAS=Gen.Name--------
O=AUTO,P=000
M237,237,232,49.9
G000,000,000,00.0
A003.0,000.0,000.0
B=14.1V,h=00000
T=99%,U=00
MC=ON,Z=00
E0000,A000
#41001,Start failure
