Page 12/44
1- 7.4.3 Genset 2
(shown only in case of 3-phase system)
A)
Generator apparent power L1-L2-L3 and total
B)
Generator active power L1-L2-L3 and total
C)
Generator reactive power L1-L2-L3 and total
1- 7.4.4 Genset 3
(shown only in case of 3-phase system)
A)
Generator apparent power L1-L2-L3 and total
B)
Generator active power L1-L2-L3 and total
C)
Generator power factor L1-L2-L3 and total
1- 7.4.5 Genset 4
(shown only in case of 3-phase system)
A)
Generator apparent power L1-L2-L3 and total
B)
Generator reactive power L1-L2-L3 and total
C)
Generator power factor L1-L2-L3 and total
1- 7.4.6 Genset control kWh
A)
Total active energy supplied by generator (upgraded every
work hour with KG closed)
B)
Total generator energy cost
C)
Cost of each generator MWh
1- 7.5 Display pages - Engine
A)
Total work hours of the generator
B)
Battery voltage of the generator
C)
Hours left to service
D)
Oil pressure
E)
Engine temperature
F)
Fuel level percentage
Note:
this page is shown only if parameter B inside menu M7.1 is
set to “Modbus Master” and parameter I is set to “On”.
1- 7.6 Display pages - Hours
A)
Total work hours of the generator
B)
Total work hours with KG closed and load > 0
C)
Total work hours with KR closed and load > 0
1- 7.7 Display pages - Events log
The events log page shows you the last alarms with the date and
time.
A) First event inside selected page: each event records alarm ID,
alarm name, date and hour.
B) Second event inside selected page.
C) Press the UP or DOWN button to select the up or down arrow,
then press “ I ”. This way you can scroll the events (up to 250).
1- 7.8 Display pages - System
1- 7.8.1 I/O digital
In this page you can see the state of all the 5 digital inputs (from J4.4
to J4.8) and outputs KG (J1.4), KR (J1.1), plus 6 programmable
outputs (from J5.8 to J5.11, J5.4 and J5.5).
1- 7.8.2 I/O analog
In this page you can see the state of 8 analog inputs (mains voltages
excluded).
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
D
E
F
A
B
C
A
B
C
