Introduction
1.6 Warranty conditions
SITRANS SL
12
Operating Instructions, 12/2010, A5E01132948-04
1.6
Warranty conditions
We expressly point out that the product quality is exclusively and conclusively described in
the sales contract. The content of this product documentation is neither a part of a previous
or existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which
also contains the complete and solely applicable liability provisions. The provisions defined
in the sales contract for the responsibility for defects are neither extended nor limited by the
remarks in this document.
1.7
Delivery information
The respective scope of delivery is listed on the shipping documents – enclosed with the
delivery – in accordance with the valid sales contract.
When opening the packaging, please observe the corresponding information on the
packaging material. Check the delivery for completeness and undamaged condition. In
particular, you should compare the Order No. on the rating plates with the ordering data, if
available.
If possible, please retain the packaging material, since you can use it again in case of return
deliveries.
1.8
Standards and regulations
As far as possible, the harmonized European standards were the basis for the specification
and production of this device. If no harmonized European standards have been applied, the
standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.