Siemens SITRANS F FUE380, Operating Instructions Manual, Page: 92 / 102

Modbus
Address
Parameter Default
value
Value
range
Access
level
Description
40323 253 Consumption fault ap‐
pears
Last fault
appear
date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
40326 254 Consumption fault disap‐
pears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
12* 255 Leakage alarm output en‐
able
Yes No, Yes R/W Select "Yes" to enable active alarm on
alarm output / call-up
40329 256 Leakage fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
40330 257 Leakage fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
40331 258 Leakage fault appears Last fault
appear
date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
40334 259 Leakage fault disappears Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
13* 260 Empty pipe alarm output
enable
Yes No, Yes R/W Select "Yes" to enable active alarm on
alarm output / call-up
40337 261 Empty pipe fault timer e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
40338 262 Empty pipe fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
40339 263 Empty pipe fault appears Last fault
appear
date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
40342 264 Empty pipe fault disap‐
pears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
Service
17
510 Fixed flow mode enable Yes No, Yes R/W Select "Yes" to force the device to show
a fixed flow value
Default must be "No"
Always manually reset the value to "No"
40801 511 Fixed flow value 0 -1E+09 to
1E+09
R/W Fixed flow value for enabled fixed flow
40803 515 Controlling output A and
B
Auto Auto,
Forced
HW key Control of output A and B is used to stop
or force the output A and/or B.
For editing, use device menu "Service".
Valid if pulse output is enabled
Power
43120
130 Consumed battery ca‐
pacity
e.g.
2.054239
Ah
Read The amount of energy consumed since
last time the battery was replaced.
Valid only for battery-powered versions
Parameter lists
A.3 Diagnostic
FUS380/FUE380
92
Operating Instructions, 09/2016, A5E00730100-AB