Safety notes
2
2.1
General safety instructions
CAUTION
Correct, reliable operation of the product requires proper transport, storage, positioning and
assembly as well as careful operation and maintenance.
Only qualified personnel should install or operate this instrument.
Note
Alterations to the product, including opening or improper modifications of the product are not
permitted.
If this requirement is not observed, the CE mark and the manufacturer's warranty will expire.
2.2
Lithium batteries
Lithium batteries are primary power sources with high energy content designed to provide the
highest possible degree of safety.
WARNING
Potential hazard
Lithium batteries may present a potential hazard if they are abused electrically or
mechanically. Observe the following precautions when handling and using lithium batteries:
● Do not short-circuit, recharge or connect with false polarity.
● Do not expose to temperatures beyond the specified temperature range.
● Do not incinerate.
● Do not crush, puncture or open cells or disassemble.
● Do not weld or solder to the battery’s body.
● Do not expose contents to water.
2.3
Laws and directives
General requirements
Installation of the equipment must comply with national regulations. For example EN 60079-14
for the European Community.
FUS380/FUE380
Operating Instructions, 09/2016, A5E00730100-AB
13