manualshive.com logo in svg

Siemens SITRANS F FUE380, Operating Instructions Manual, Page: 45 / 102

Share
Download
Siemens SITRANS F FUE380 Operating Instructions Manual Download Page 45

Commissioning

6

Commissioning the device:
Resetting the battery lifetime, see Start-up routine (Page 47).
It is recommended to read the basic guide to the local display and the menu structure in 

Operating the local display (Page 45) and Commissioning via PDM (Page 48) before 

commissioning the device.

6.1

Operating the local display

The local display is divided into 3 areas:   
● Top area with symbols for status information
● Mid area with actual readings
● Lower area with index number of the shown menu or the service menu symbol (  ).
Activate the push button to go the next index menu and related information. The service menu 

is accessible from all menus by pressing the push button for minimum 2 seconds.

Figure 6-1

Operating the local display

Table 6-1

Status information symbols

Symbol

Description
Mains power supply connected

Battery charge status

Warning

FUS380/FUE380

Operating Instructions, 09/2016, A5E00730100-AB

45

Summary of Contents for SITRANS F FUE380







































































































Reviews:

No comments