Modbus RTU RS-485
9
SFIDK.PS.023.D2.02
4.
Commissioning
4.2 Modbus RTU display
menu
To change (or view) the Modbus RTU settings from the keypad display.
1.
Press [Top key] for two seconds. (
Note:
For
“View”
mode only, skip steps 2 & 3).
2.
Type in
password (1000)
by pressing [Change key] two times, and then press
[Lock key] and hold for two seconds
3.
The display now says
“Basic settings”
4.
Press [Forward key] until you reach the
“Modbus RTU module”
menu item
5.
Press [Lock key]
6.
You can now cycle through all the
Modbus RTU
settings by pressing [Forward key]
7.
Press [Top key] for two seconds and you return to 1.
