manualshive.com logo in svg

Siemens SIREMOBIL Compact, Service Instructions Manual

Share
Download
Siemens SIREMOBIL Compact Service Instructions Manual Download Page 41

Adjustments / Programs

5 - 19

Siemens AG

Register 5

RXR2-130.061.02

Page 19 of 22

SIREMOBIL Compact

Medical Engineering

Rev. 03

10.03

CS PS 24

System Manual

 

Overview of SIREMOBIL Compact parameters 

5

Invoke the Moreinfo.hlp help file on the service PC for a short description of the parame-
ters available on the SIREMOBIL Compact.

Overview of Memoskop C / C-E parameters

5

User Setup

•

The User Setup is invoked with the CTRL + U key combination.

•

The available functions are described in the SIREMOBIL Compact Operating 
Instructions.

Technical Setup

•

The technical setup is invoked with the CTRL + T key combination.

The following functions can be invoked:

If parameters have been changed and saved in the "Adjustments, 
Parameter" menu with Save to file, you must exit the service pro-
gram with "Logoff" and "Quit" to save the modified parameters to 
the disk.

Function:

Comments:

1.

Test pattern generation

Not for service, invoke the necessary test images on the 
service PC.

2.

Video frequency 

The currently programmed frame rate is shown in the 
parentheses to the right. After downloading the 
Memoskop or after replacement, the Memoskop will start 
up at the default video frequency (50 Hz).
If the monitors are configured for a different video fre-
quency, you must perform "blind" configuration for the cor-
rect video frequency.
Refer to Configuring video frequency.

3.

Number of monitors

Allows you to program the number of monitors used (1 or 
2) .

4.

Hardcopy setup

You can configure the connection for hardcopy cameras. 
Check whether 5500 is programmed for "4 Max Hardcopy 
time" and if not, program this value.

5.

Edge 1 coef set

Allows configuration of edge enhancement. Check 
whether 3 is programmed and if not, program this value.

6.

Edge 2 coef set

Allows Configuration of edge enhancement. Check 
whether 8 is programmed and if not, program this value.

7.

Motion detection setup

Configures the motion detector.
Check if at MD 1: Threshold 100 and at MD 2: Threshold 
120 is programmed, if not, program these values.

8.

Circle mask setup

Allows you to configure the diameter of the circle mask.

NOTE

Summary of Contents for SIREMOBIL Compact





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands