Marshalling
79
7SS52 V4 Manual
C53000-G1176-C182-3
Figure 4-28 Marshalling the bay units - dialog box 6101 Binary input 1
In the selection box select the display text of the messages you wish to assign to
the selected component. If this component is a binary input or an LED, you must
select an additional indication from the drop-down list box. Subsequently click
OK
.
The active dialog box closes and you return to the previous dialog box. The display
of the allocated messages is updated according to your selection.
Repeat the procedure to perform further allocations. When you have made all allo-
cations for the current component click
Close
. The active dialog box closes and you
return to the previous dialog box.
You can now select a further component if needed. If not, click
Close
. The active
dialog box closes and you return to the dialog box
Marshalling
.
You can now select a further component group for configuration. To finish the proc-
ess, click
Close.
Next you will be prompted whether to save the modified settings
to files. Click
Yes
to save the data. Click
No
to discard the changes. To neither save
nor discard the modified settings click
Cancel
. In this case the dialog box
Marshal-
ling
remains opened.
www
. ElectricalPartManuals
. com
