Control During Operation
252
7SS52 V4 Manual
C53000-G1176-C182-3
To hide the measured value boxes, proceed analogously. With the measured value
boxes hidden, the menu item
View
→
Measured Value Boxes
is not checked off and
the
command button is not active.
The setting for the display of the measured value boxes is saved and restored after
the restart of the Plant Visualization.
Check zone
You can also show or hide the measured value boxes for the differential current and
for the restraint current of the checkzone. The measured values are displayed as per-
centages.
Display of Feeder
Statuses
In the plant visualization, special operating statuses of a feeder are marked by a fault
LED. This applies to planned statuses such as "Maintenance" or "Feeder out of
Service" or disturbances such as "Intermediate Position of an Isolator" or the
interruption of the connection between central unit and bay unit.
The occurrence of such a disturbance is marked by an illuminated LED icon located
at this feeder.
Figure 6-34 Display after Occurrence of Disturbance with Highlighted LED
To show or hide the information list, click on the LED icon which will go out thereby.
The display of the LED icon will not be reset until the elimination of the disturbance.
You will still find the entire message texts under the DIGSI messages.
www
. ElectricalPartManuals
. com
