Siemens SIPROCESS GA700, Operating Instructions Manual

Page: 187 / 224

8.4 Commissioning the SIPROCESS GA700
Procedure
Startup
①
Product designation
②
Version of the device firmware
③
Progress bar
Figure 8-1 Splash screen
1. Supply the device with power. Information on the power supply of the device is available
in the device-specific documentation → Table A-5 References 3 - Operating Instructions
(Page 99).
The boot process starts. The splash screen is initially visible on the device display.
2. Scan of basic settings:
The boot process is interrupted momentarily. Two successively displayed editing windows
prompt you to select the display language and to enter the date and time.
– Select one of the offered language options in the first editing window.
– Then set the date and time of day.
Note
Date / time settings
When the power is off, these settings for the date and time are stored on the device for
a period of approximately 14 days.
After putting the device back into operation, you will need to reset the date and time.
Once you have entered the requested information, the boot process continues.
Commissioning
8.4 Commissioning the SIPROCESS GA700
Field device
Operating Instructions, 05/2015, A5E35640463-02
75