3. After selection, you see the "Serilog" option.
4. Select the "Serilog" option.
– On the right-hand side, scroll to entry "
pathFormat
".
– Change entry "
%TEMP%
".
Change the target directory in which the log files are stored, e.g.
"C:/log".
– Click on the "UPDATE" button to save the changes.
Activating the debug level for logging
Manage MyResources
1. Activate "Debug Level" for logging:
– Enter the following setting:
Change the entry
"MinimumLevel"
from
"Information"
to
"Verbose"
.
– Click on the "UPDATE" button to save the changes.
2. Perform a restart so that the settings are accepted.
Configuring the settings
6.1 Configuration using the "Consul" software
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
133
