Introduction to the SINAUT ST7 system
1.8 Connecting cables
Station control system
58
System Manual, 07/2009, C79000-G8976-C178-07
1.8.2
WAN connecting cables
A 6NH7700-xxx connecting cable ships with every MD modem. This can be used to connect
the modem to the relevant WAN network.
The connecting cables are also available as spares under the number shown.
Table 1- 7
WAN connecting cables
Order no.
Description
Illustration
6NH7700-2AR60
Connecting cable with 2 x RJ-12 plugs for connection to an
MD2 modem (RJ-12) with an LTOP overvoltage protection
module (RJ-12).
Cable length 6 m
5-
5-
6NH7700-3BR60
Connecting cable with 2 x RJ-12 Western plug and snap-
on TAE6N plug to connect an MD3 modem (RJ-12) to a
telephone jack (TAE6N) or an LTOP overvoltage protection
module (RJ-12) if the MD3 modem is being operated as a
dedicated line modem.
Cable length 6 m
5-
5-
7$(1
6NH7700-4AR60
Connecting cable with RJ-12 and RJ-45 plug to connect an
MD4 modem (RJ-12) with an ISDN-S
0
jack (RJ-45).
Cable length 6 m
5-
5-
1.8.3
TIM 4R / 4RD interface adapter cable
The TIM 4R / TIM 4RD has a second serial interface X3 (combined RS-232/RS-485). The
interface (8-pin RJ-45 jack) is accessible from below.
An adapter cable is required to connect the second serial port with an external modem or
other transmission device. At one end of this cable, there is an RJ-45 plug and at the other
end, a 9-pin D-sub miniature male connector to which the normal connecting cable to the
modem or transmission device can be connected.
The adapter cable is supplied with each TIM 4R/4RD module. It can also be ordered as a
spare part under the number listed in the following table.
Table 1- 8
TIM 4R / 4RD interface adapter cable
Order no.
Description
Illustration
6NH7700-0AS05
Adapter cable for connecting the 2nd serial RS-232/RS-485 port
integrated in a TIM 4R / 4RD to convert the internal plug (RJ-45)
to the 9-pin D-sub miniature male connector required externally.
Cable length 0.5 m
7,0
5-
0'
SLQ
'VXE
