
Installing and putting a SINAUT modem into operation
5.7 Analog dial-up modem MD3
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
229
Front view of the MD3 with removed front panels
The following figure once again shows the front view of the MD3 modem, here, however, the
front panels have been removed to show the connectors located behind them.
X1
X2
X3
M
L+
M
DC
24V
7;'
5;'
'75
57621/
&765,
'&'
;SLQPDOHFRQQHFWRU
56SRUWIRUFRQQHFWLQJWKHHQGGHYLFH
7,0
7KH56LQWHUIDFHLVDFWLYDWHGXVLQJD
SLQ',/VZLWFK7KLVLVDFFHVVLEOHIURP
EHORZWKURXJKWKHKRXVLQJJULOO
$FFHVVIURPEHORZWRWKH;:$1MDFNRIWKH
PRGHP5-:HVWHUQMDFN
;SLQIHPDOHFRQQHFWRU
56SRUWIRUFRQQHFWLQJWKHHQGGHYLFH
7,0RUIRUSDUDOOHOFRQQHFWLRQRIDIXUWKHU
0'PRGHP
7KH56LQWHUIDFHDQGWKHWHUPLQDWLQJ
UHVLVWRUDUHDFWLYDWHGXVLQJDSLQ',/
VZLWFK7KLVLVDFFHVVLEOHIURPEHORZWKURXJK
WKHKRXVLQJJULOO
3RZHUVXSSO\FRQQHFWRUIRU9'&
s
Figure 5-26 Front view of the MD3 modem with removed front panels
Pinout of the RS-232 and RS-485 ports
The X1 connector is designed as a 9-pin D-sub miniature male connector. The pinout is
shown in the following table. As an RS-232 port, the pinout corresponds to that of a
standardized PC connector.
The RS-232 interface can be activated using a 4-pin DIL switch accessible from below
through the housing grill.
Table 5- 24 Pinout of the X1 RS-232 connector
Illustration
Pin no.
Signal name
Signal direction
Remark
1
DCD
Output
2
RXD
Output
3
TXD
Input