Station control system
System Manual, 07/2009, C79000-G8976-C178-07
3
Preface
About this documentation
What's new in SINAUT ST7?
●
New version "SINAUT ST7 configuration software for the PG/PC" V5.0
–
The Ethernet TIMs can be configured for communication via the MSC protocol. This
allows the use of the GPRS/GSM modem SINAUT MD720-3 even in SINAUT in
Internet/GPRS networks. An encrypted connection can be established from an
Ethernet TIM to the Internet via a DSL modem.
–
The time slot method can now also be configured with the "SINAUT ST7 configuration
software for the PG/PC" as of V5.0 for a master TIM without DCF7 receiver, if a
TIM 4R-IE with an Ethernet connection to an ST7cc/ST7sc PC is used as the master
TIM.
The configuration software Version V5.0 can be used with STEP 7 as of Version V5.4
Service Pack 4.
The configuration software version V5.0 is supported by the following operating systems:
–
Windows XP Professional SP2
–
Windows Server 2003 SP2
–
Windows Vista 32 Bit Ultimate and Business (with or without SP1)
●
New firmware version V2.0 for all Ethernet TIM modules
The new firmware supports the MSC protocol.
Replaced documentation
This manual replaces the manual release 05/2007.
Purpose of this documentation
The SINAUT ST7 system manual is split into two complementary volumes.
●
Volume 1: System & Hardware
This documentation will support you on your way to successful application of SINAUT
ST7. This introduces you to the topic in clear and straightforward steps and provides you
with an overview of the hardware components of the SINAUT ST7 station control system.
You will be supported during the planning of network structures and topologies and will
see how to install and configure individual components based on the installation
guidelines. You will also find this documentation useful when installing and
commissioning the SINAUT modules.
