Introduction to the SINAUT ST7 system
1.3 SINAUT TIM communication modules
Station control system
28
System Manual, 07/2009, C79000-G8976-C178-07
●
This means that these devices can handle SINAUT communication over up to two
SINAUT WAN networks.
●
The two transmission paths can be different or identical. They can be operated
independently or form a redundant transmission path.
●
When installed as a CP in an S7-300, the following communication is also possible:
–
With the CPU
–
over the MPI interface of this CPU with other CPUs and control center PCs (ST7cc,
ST7sc) connected over the MPI bus.
–
with other TIMs in this rack
●
Message memory for up to 10,000 data messages
The following figure shows one of the TIM 4 variants.
Figure 1-5
SINAUT TIM 4 communications module
