Siemens SIMOTICS S-1FG1, Operating Instructions Manual

Page: 81 / 170

Mounting
4.2 Checklists for mounting
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
79
NOTICE
Violation of the maximum permissible oil sump temperature
The oil sump temperature may be exceeded if the temperature monitoring equipment is
incorrectly set.
An alarm must be output when the maximum permissible oil sump temperature is reached.
The geared motor must be switched off when the maximum permissible temperature is
exceeded. If the geared motor is shut down, then this can cause the machine to come to a
stop.
NOTICE
Thermal damage to temperature-sensitive parts
Some parts of the electrical motor enclosure can reach temperatures that exceed 100 °C. If
temperature-sensitive parts, for instance electric cables or electronic components, come
into contact with hot surfaces then these parts can be damaged.
•
Ensure that no temperature-sensitive parts come into contact with hot surfaces.
4.2 Checklists for mounting
Note
Required checks
The checklists below do not purport to be complete. It may be necessary to perform
additional checks and tests in accordance with the situation specific to the particular
installation site.
Assemble the servo geared motor as described in the following chapters of the operating
instructions.
Thoroughly familiarize yourself with the safety instructions and observe the checklists below
before starting any work.
Table 4- 1 Checklist (1) - general checks
Check OK
Are all of the necessary components of the configured drive line-up available, correctly
dimensioned, installed and connected?
Are the environmental conditions in the permissible range?