Siemens SIMOREG DC-MASTER, Operating Instructions Manual

Page: 51 / 94

12.2010 Commissioning
Siemens AG 6RX1700-0DD74 ENGLISH
51
SIMOREG DC-MASTER Converter Commutation Protector Operating Instructions
PNU Description Value range
[dimension]
Graduation
No. of
indices
Factory
setting (FS) Access
level
r51569
[0...15] CCP serial number / CCP serial No.
Description:
Displays the serial number of the Converter Commutation Protector (CCP).
Note:
The individual characters of the number are displayed in the ASCII code in the
indices.
An ASCII table (excerpt) can be found in the Appendix of the List Manual for
example.
0 to 255
1
1 Ind: 16
- 3
r51570 CCP order number / CCP Order No.
Description:
Displays the order number (MLFB) of the connected Converter Commutation
Protector (CCP).
Value:
0: No CCP connected
250: 6RA7085-6FC00-0
251: 6RA7091-6FC00-0
252: 6RA7095-6FC00-0
253: 6RA7090-6KC00-0
254: 6RA7095-6KC00-0
0 to 254
1
1 Ind: None
- 3
r51571 CCP rated supply voltage / CCP V_rated
Description:
Displays the rated supply voltage according to the rating plate of the Converter
Communication Protector (CCP).
-
[V]
- Ind: None
- 3
r51572 CCP rated current / CCP I_rated
Description:
Displays the rated current according to the rating plate of the Converter
Communication Protector (CCP).
-
[A]
- Ind: None
- 3
CO/BO: CCP state/ CCP state
Description:
Displays the connector output for the state of the Converter Communication
Protector (CCP).
Bit array Signal name 1 signal 0 signal
Bit 00 Voltage at U, V, W ok. Yes No
Bit 01 Voltage at C - D higher than +100 V Yes No
Bit 02 Voltage at C - D less than -100 V Yes No
Bit 03 Quenching capacitors have reached their
setpoint voltage Yes No
Bit 04 Turn-off operation running Yes No
Bit 05 Connection between parallel CCP ok. Yes No
Bit 08 Connector X165_2 (at the DCM) is connected
with X165 (at the CCP) Yes No
Bit 09 I2t value voltage limiting chopper 1 too high Yes No
Bit 10 I2t value voltage limiting chopper 2 too high Yes No
Bit 11 Memory for technical data for the CCP ok. Yes No
r51574.
0...12
Bit 12 Chopper capacitors pre-charging completed Yes No
-
1
1 Ind: None
- 3
r51575 CO: CCP I2t value voltage limiting chopper 1 / CCP I2t chopper 1
Description:
Displays the I2t value for voltage limiting chopper 1 for the Converter
Commutation Protector (CCP).
-
[%]
- Ind: None
- 3
r51576 CO: CCP I2t value voltage limiting chopper 2 / CCP I2t chopper 2
Description:
Displays the I2t value for voltage limiting chopper 2 for the Converter
Commutation Protector (CCP).
-
[%]
- Ind: None
- 3