Siemens SIMATIC S7-400H System Manual Download Page 296

Page: 296 / 504

System modifications during operation

17.4 Removing components in PCS 7

S7-400H

296

System Manual, 03/2012, A5E00267695-11

17.4.1

PCS 7, step 1: Editing the hardware configuration offline

Starting situation

The fault-tolerant system is operating in redundant system mode.

Procedure

Perform offline only the configuration modifications relating to the hardware being

removed. As you do, delete the icons to the channels that are no longer used.

Compile the new hardware configuration, but do not load it into the target system just yet.

Result

The modified hardware configuration is in the PG/ES. The target system continues operation

with the old configuration in redundant system mode.

Summary of Contents for SIMATIC S7-400H

























































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMATIC S7-400H

Reviews:

Related manuals for SIMATIC S7-400H

Brands by name

Popular brands

Siemens SIMATIC S7-400H, System Manual

Search results

Summary of Contents for SIMATIC S7-400H

Reviews:

Related manuals for SIMATIC S7-400H

Brands by name

Popular brands