Siemens SIMATIC RF680M Operating Instructions Manual Download Page 9

Page: 9 / 108

SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618

Introduction

Purpose of this document

These operating instructions contain information required for starting up and using the

RF680M device.
The documentation is aimed at commissioning engineers and machine operators who start

up the application themselves, and it describes the functions of the software "RF-

MANAGER" and "RF680M".

Scope of validity of this document

This documentation is valid for the SIMATIC RF680M Mobile Reader and describes the

delivery status from 12/2010.

Further information

The present instructions are a supplement to the operating instructions of the basic device

PSION WORKABOUT PRO.
The documents "Quick Reference Guide" and "Regulatory & Warranty Guide" for

"WORKABOUT PRO C/M-E Hand-Held Computer" are included with the device. Please note

the information they contain.
You can find further information in the PSION User Manual and in the documentation for the

docking station.

Conventions

The following terms/abbreviations are used synonymously in this document:
● tag, transponder, mobile data memory (MDS), data carrier
● Mobile reader, reader, handheld terminal, handheld; write/read device (SLG)

History

Previous editions of these operating instructions:

Edition

Note

12/2010

First edition

06/2011

Revision of the Operating Instructions

Summary of Contents for SIMATIC RF680M













































































































Search results

Summary of Contents for SIMATIC RF680M

Reviews:

Related manuals for SIMATIC RF680M

Brands by name

Popular brands

Siemens SIMATIC RF680M, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC RF680M

Reviews:

Related manuals for SIMATIC RF680M

Brands by name

Popular brands