Siemens SIMATIC RF680M Operating Instructions Manual Download Page 100 | Manualshive

Page: 100 / 108

background image

Appendix

A.4 Service & support

SIMATIC RF680M Mobile Reader

98

Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618

The addresses are found on the following pages:
● In Internet (

http://www.siemens.com/automation/partner

)

● In Catalog CA 01
● In Catalog ID 10 specifically for industrial communication / industrial identification systems

Technical Support

You can access technical support for all IA/DT projects via the following:
●  Phone: + 49 (0) 911 895 7222
●  Fax: + 49 (0) 911 895 7223
●  E-mail (

mailto:[email protected]

)

● Internet: Online support request form: (

http://www.siemens.com/automation/support-

request

)

Service & support for industrial automation and drive technologies

You can find various services on the Support homepage

(

http://www.siemens.com/automation/service&support

) of IA/DT on the Internet.

There you will find the following information, for example:
● Our newsletter containing up-to-date information on your products.
● Relevant documentation for your application, which you can access via the search

function in "Product Support".

●  A forum for global information exchange by users and specialists.
●  Your local contact for IA/DT on site.
●  Information about on-site service, repairs, and spare parts. Much more can be found

under "Our service offer".

RFID homepage

For general information about our identification systems, visit RFID homepage

(

http://www.siemens.com/ident

).

Technical documentation on the Internet

A guide to the technical documentation for the various products and systems is available on

the Internet:
SIMATIC Guide manuals (

http://www.siemens.com/simatic-tech-doku-portal

)

Online catalog and ordering system

The online catalog and the online ordering system can also be found on the Industry Mall

Homepage (

http://www.siemens.de/industrial-controls/mall

).

«
...
98
99
100
101
102
...
»

Summary of Contents for SIMATIC RF680M













































































































Reviews:

No comments

Related manuals for SIMATIC RF680M

Brand: Datalogic Pages: 2

Brand: Partner Pages: 13

Cassiopeia E-115

Brand: Casio Pages: 67

Brand: RBR Pages: 28

WORKABOUT PRO C

Brand: Psion Teklogix Pages: 50

Brand: HP Pages: 258

Brand: HP Pages: 8

Brand: HP Pages: 11

HX2190 - iPaq Pocket PC

Brand: HP Pages: 13

iPAQ h5400 - Pocket PC

Brand: HP Pages: 2

Field Xpert SFX350

Brand: Endress+Hauser Pages: 72

Brand: HandHeld Pages: 77

Brand: Atid Pages: 60

Brand: Nagra Pages: 77

Brand: TEL-TRU Pages: 25

Brand: Psion Teklogix Pages: 396

Brand: Mobile Crossing Pages: 1

Brand: Mobile Crossing Pages: 63

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands