Siemens SIMATIC RF680M Operating Instructions Manual Download Page 13

Page: 13 / 108

SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618

Description

SIMATIC RF680M expands the RF600 identification system with a powerful mobile reader

for applications in the areas of logistics, production and service. In addition, it is an

indispensable aid for startup and testing.

3.1

Field of application and features

Device variants for different frequency ranges

The SIMATIC RF680M device is available in two variants:
● For the European frequency bands
● For the US frequency bands

Implementation environment, field of application and features

● Field of application

The SIMATIC RF680M mobile readers can be used in a harsh environment. The device

is extremely rugged and protected against spray water. The backlit display is easy to read

even under unfavorable lighting conditions.

● RFID system

The SIMATIC RF680M mobile reader is intended especially for the SIMATIC RF600 RFID

system. The device can be used to process all RF600 tags and compatible transponders.

● RF-MANAGER

The SIMATIC RF680M mobile reader can exchange data with the RF-MANAGER over a

WLAN connection. This means that RFID data that has been read locally is also available

for evaluation in enterprise systems.

● Tag standards

It is not possible to edit data memories of other RFID systems. The following tag

standards are supported:
– ISO 18000-6c (EPC Class1 GEN2)

● The software "RF-MANAGER" and "RF680M"

The RF-MANAGER and RF680M software is stored in non-volatile memory on an

integrated flash disk and permits user-friendly, distributed reading and writing of all

RF600 tags.

Summary of Contents for SIMATIC RF680M













































































































Search results

Summary of Contents for SIMATIC RF680M

Reviews:

Related manuals for SIMATIC RF680M

Brands by name

Popular brands

Siemens SIMATIC RF680M, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC RF680M

Reviews:

Related manuals for SIMATIC RF680M

Brands by name

Popular brands