The software "RF-MANAGER"
8.3 Application mode "Mobile"
SIMATIC RF680M Mobile Reader
50
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
1.
Enter a password with up to 8 characters under "New Password".
2.
Then enter the password again under "Confirm password".
3.
Select the "OK" button.
The password is now set. All write functions to a tag are now protected by this password.
If you want to perform a write function now, you must enter the appropriate password. You
only have to enter the password once in the case of several consecutive write commands. It
will remain valid for 5 minutes after the last write function is executed.
This password is also required to exit the application.
Default password
No password is assigned in the delivery condition.
Note
Forgot password?
If you have forgotten your password, the original status of the device can be restored. See
System reset (Page 89)
8.3.6.3
Reader status
Version statuses and settings of the RF600 read/write device can be read out with the
"Reader Status" function.
● API version
● Model (US or EU)
● Firmware version of the RFID module.
Figure 8-14 Reader status
Summary of Contents for SIMATIC RF680M
Page 2: ......