Siemens SIMATIC PC 670, Equipment Manual

Page: 75 / 200

Maintaining and Extending the Computing Unit
Release 04/02
4-15
Panel PC 670 Computing Unit, Equipment Manual
Adjusting the module retainer plate
Proceed as follows to install the module retainer plate.
1. Insert the slide element through the guide slit until it is resting firmly on the
module. The module must now be introduced into the notch.
Caution
Do not exert pressure on the module! Therefore, do not use force to press the
slide module onto the module.
2. Remove the surplus slide element:
– Score the slide element at the top edge of the support with a knife and snap
it off.
– Nip off the surplus with a sharp side cutter.