manualshive.com logo in svg

Siemens SIMATIC PC 670, Equipment Manual

The Siemens SIMATIC PC 670 Equipment Manual is available for free download at manualshive.com. This comprehensive manual provides detailed information and instructions on operating and maintaining the SIMATIC PC 670, ensuring optimal performance and reliability. Get your copy now to access all the essential information you need.

Share
Download
background image

Glossary

Release 04/02

Glossary-5

Panel PC 670 Computing Unit, Equipment Manual

S

SCSI interface

Small Computer System Interface. Interface for connecting SCSI devices (for
example, hard disks, CD-ROM drives)

SETUP (BIOS Setup)

A program which defines information about the device configuration. The device
configuration of the SIMATIC PC is preset. Changes have to be made when a
memory expansion module, new modules or drives have to be activated.

T

TFT display

Thin-film transistor color display

U

USB port

(Universal Serial Bus) for connecting devices to the USB port.

V

V.24 interface

The V.24 interface is a standard interface for data transmission, and printers,
modems, etc. can be connected to it.

VGA port

(Video Graphics Array) for connecting an external monitor, 15-pin, sub-D
connectors, sockets.

W

Warm restart

By warm restart we mean a restart after a program abort. The operating system is
reloaded and started. A warm restart is performed by pressing the keys CTRL+
ALT+ DEL.

Summary of Contents for SIMATIC PC 670









































































































































































































Reviews:

No comments

Related manuals for SIMATIC PC 670

EBECO Foil 48 V Assembly Instructions Manual preview
Foil 48 V
Brand: EBECO Pages: 10
Redarc SMFB1160 Instruction Manual preview
SMFB1160
Brand: Redarc Pages: 16
Huawei ViewPoint 9000 Series User Manual preview
ViewPoint 9000 Series
Brand: Huawei Pages: 34
EAE Miola Touch Panel 10 Quick Start Manual preview
Miola Touch Panel 10
Brand: EAE Pages: 2
tradetested 960889 User Manual preview
960889
Brand: tradetested Pages: 3
Exiom Solution EX P-48 Series Installation Manual preview
EX P-48 Series
Brand: Exiom Solution Pages: 6
ViewSonic NexTVision N1700w Specifications preview
NexTVision N1700w
Brand: ViewSonic Pages: 2
Wacom CINTIQ DTH-2700 Important Product Information preview
CINTIQ DTH-2700
Brand: Wacom Pages: 27
Insignia NS-F14TV User Manual preview
NS-F14TV
Brand: Insignia Pages: 94
Ghost Controls AX30 Quick Start Manual preview
AX30
Brand: Ghost Controls Pages: 4
IVC Displays NP-5**A Series User Manual preview
NP-5**A Series
Brand: IVC Displays Pages: 93
PROMULTIS Touchtable User Manual preview
Touchtable
Brand: PROMULTIS Pages: 21
Vimar By-me Eikon Evo 21554 Manual preview
By-me Eikon Evo 21554
Brand: Vimar Pages: 6
Savant ITP-E8000 Series Quick Reference Manual preview
ITP-E8000 Series
Brand: Savant Pages: 2
EPS EPS-100W-KIT User Manual preview
EPS-100W-KIT
Brand: EPS Pages: 16
3M Petrifilm 6475 Product Instructions preview
Petrifilm 6475
Brand: 3M Pages: 111
Faytech FT32N4200W4G128GCAP Manual preview
FT32N4200W4G128GCAP
Brand: Faytech Pages: 2
IBC SOLAR TopFix 200 Installation Manual preview
TopFix 200
Brand: IBC SOLAR Pages: 119

Brands by name

Popular brands

Load more brands