Siemens SIMATIC Mobile Client900RFN Operating Instructions Manual Download Page 9

Page: 9 / 164

Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA

Overview

1.1

Product description

The SIMATIC Mobile Client900RFN is a portable HMI device with a rugged and ergonomic

design. A high-performance processor and Ethernet capability mean the device is excellently

suited to a wide range of uses. The device is lightweight and robust, has an easy-to-read

display and can be operated by both left-handed and right-handed users.

The device also has the following additional features:

●

Ethernet, integrated with connecting cable

●

9" TFT screen with color depth of 24 bits

●

USB port for service purposes

●

Heating system

The device heats up, if necessary, and keeps the internal temperature within the optimum

temperature range for as long as the heat output permits.

The SIMATIC Mobile Client connection box, connection box for short, is designed to be

mounted to the wall of the control cabinet. It provides the power supply and control system

connections in the control cabinet. The device is connected to the connection box with a

connecting cable.
The device is used as a mobile handheld terminal. The connecting cable can be easily

connected and disconnected at both the connection box and the handheld terminal. The

device enables you to use text- or graphic-based projects even more efficiently for simple

and medium-complexity operator control and monitoring tasks on machines and systems.

Summary of Contents for SIMATIC Mobile Client900RFN





































































































































































Search results

Summary of Contents for SIMATIC Mobile Client900RFN

Reviews:

Related manuals for SIMATIC Mobile Client900RFN

Brands by name

Popular brands

Siemens SIMATIC Mobile Client900RFN, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Mobile Client900RFN

Reviews:

Related manuals for SIMATIC Mobile Client900RFN

Brands by name

Popular brands