Parameter assignment of a Mobile Client
4.5 Control Panel
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
57
4.5.5.3
Setting the character repeat rate of the screen keyboard
You can use this function to set the character repeat and repeat delay for the screen
keyboard.
Requirement
You have opened the "Keyboard Properties" dialog with the "Keyboard" icon.
①
Check box for selecting the character repeat
②
Slider control and buttons for the delay time before character repeat
③
Slider control and buttons for the rate of the character repeat
④
Test box
Procedure
1.
If you want to enable character repetition, select the "Enable character repeat" check box.
2.
If you want to change the delay, press a button or the slider in the "Repeat delay" group.
Moving the slider to the right shortens the delay time. Moving it to the left extends the
delay time.
3.
If you want to change the repeat rate, press a button or the slider in the "Repeat rate"
group.
Moving the slider to the right will accelerate the repeat rate. Moving to the left will slow
down the repeat rate.
4.
Check the settings for the touch control by touching the test field.
The screen keyboard is displayed.
5.
Move the screen keyboard as needed.
6.
Press the key for a character and keep it pressed.
Check the implementation of the character repetition and the rate of the character
repetition in the test box.
7.
If the settings are not ideal, correct them.
8.
Confirm your entries.
The dialog closes.
The character repetition and delay are set.