Siemens Sentron 3VA Manual Download

Page: 293 / 492

Accessories

4.5 Manual operators

3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01

291

4.5.7

Degree of protection

4.5.7.1

IP degree of protection

When fitted with a cover frame (see illustration below), a front mounted rotary operator

installed in the panel door has degree of protection IP30.

Note
To ensure that the panel door can still be opened, the front mounted rotary operator must not

project over the cover frame by more than 5 mm when the door is closed.

4.5.7.2

NEMA degree of protection

All 3VA UL rotary operators are designed in such a way that the NEMA degrees of protection

1, 12, 3R and 4 or 4X for enclosures can be met.
The handle of the operator kit with Bowden cable is also available in variants with

NEMA degrees of protection 1, 12 and 3R or NEMA degrees of protection 4/4X.

Summary of Contents for Sentron 3VA













































































































































































































































































































































































































































































































Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands

Siemens Sentron 3VA, Manual

Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands