Siemens Sentron 3VA Page 267 Manual Download

Page: 267 / 492

Accessories

4.5 Manual operators

3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01

265

Indication of the breaker status on front mounted rotary operator

①

ON: Breaker closed

④

OFF: Breaker open

②

TRIP: Breaker tripped

⑤

RESET: Reset following a trip

③

Mounting position

4.5.3.2

Front mounted rotary operator with door interlock

The front mounted rotary operator with door interlock projects through the panel door. This

arrangement ensures that the molded case circuit breaker can be switched on only when the

panel door is closed. The door is locked automatically when the front mounted rotary

operator is turned to position ON (I).
For front mounted rotary operators with door open function, this function must be additionally

operated in order to open the door in position OFF (0).

Opening panel door with door open function.

Summary of Contents for Sentron 3VA













































































































































































































































































































































































































































































































Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands

Siemens Sentron 3VA, Manual

Search results

Summary of Contents for Sentron 3VA

Reviews:

Related manuals for Sentron 3VA

Brands by name

Popular brands