System commissioning
5.2 Accepting effective ranges and transponders
Fail-safe operation of the Mobile Panel 277F IWLAN
80
Function Manual, 08/2008, 6AV6691-1FQ01-2AB0
Procedure
Proceed as follows:
1.
Switch on the HMI device.
The Windows CE desktop with Loader is displayed.
2.
If the project does not start automatically, start the project.
The "Transponder test" dialog box opens.
To the left you will see the list with the names of all configured effective ranges.
3.
In the "Effective ranges" list highlight the first effective range that you want to verify.
The "Transponder" list on the right shows the IDs of the transponders that are assigned to
the effective range in the project.
4.
Go to the transponder that you want to verify in the "Transponder" list.
5.
In the system, read the ID of the highlighted effective range and enter this ID in the
"Effective range" box.
6.
Enter the ID of the transponder where you are located in the "Transponder" box.
7.
Verify the entered ID with the "Test" button.
When the HMI device receives the signal of the corresponding transponder, that
transponder is considered verified. The transponder will be marked with a check mark in
the list.
8.
Repeat steps 4 to 7 for all transponders of this effective range.
If you have successfully checked all transponders of an effective range, that effective
range will be indicated with a check mark in the list.
