Siemens Second Wind Function Manual Download Page 54

Page: 54 / 154

Configuration

4.2 Procedure for configuration

Fail-safe operation of the Mobile Panel 277F IWLAN

Function Manual, 08/2008, 6AV6691-1FQ01-2AB0

Basic procedure

Always use the following procedure for configuration:
1.

Create a STEP 7 project in the SIMATIC Manager.

Configure the required F-CPU and a PROFINET connection in the hardware

configuration "HW Config".

Insert a Mobile Panel 277F IWLAN in the configuration from the hardware catalog of the

HW Config by dragging it to the PROFINET connection in the station window via

Drag&Drop.

Call the object properties of the Mobile Panel 277F IWLAN using the context menu (right

mouse button) and configure the communication between the HMI device and the PLC,

see Assigning parameters for communication between the HMI device and the controller

(Page 55).

Configure other components in accordance with your plant.

Create a safety program for the F-CPU in STEP 7 with S7 Distributed Safety. Insert the

F-FBs required for the HMI device in the safety program and wire them according to

instructions. Do this according to the checklist Checklist: Creation of the safety program

(Page 59).

Start WinCC flexible ES and create a project for the HMI using the Wizard.

Set "Ethernet/Wireless" in the project view under "Communication".

Set the PROFIsafe address of the HMI device in the project view under "Device settings"

> "Device settings".

10.

Configure the effective ranges planned for your plant under "Device settings" > "Effective

ranges", see Effective ranges editor (Page 73).

11.

Configure the figures for operating and monitoring the plant. Insert the objects required

for working with effective ranges in these figures, see Objects for the Mobile Panel 277F

IWLAN (Page 73).

Further information

You have central access to SIMATIC documentation under SIMATIC in the Start menu on

the configuration computer.
More detailed information can be found under the following references:

Tool

Task

Documentation

STEP 7, HW Config

Creation of the project for the

automation system

SIMATIC > Documentation >

desired language

S7 Distributed Safety

Creation of the safety program

SIMATIC > Documentation >

desired language

WinCC flexible

Creation of the project for the

HMI device

SIMATIC > WinCC flexible 2007

> WinCC flexible help system

Summary of Contents for Second Wind



























































































































































Search results

Summary of Contents for Second Wind

Reviews:

Related manuals for Second Wind

Brands by name

Popular brands

Siemens Second Wind, Function Manual

Search results

Summary of Contents for Second Wind

Reviews:

Related manuals for Second Wind

Brands by name

Popular brands