Siemens SCALANCE XR324-4M EEC Compact Operating Instructions Download Page 7

Page: 7 / 84

Additional documentation

The manual
● "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks (

https://

support.industry.siemens.com/cs/ww/en/view/1172207

contains additional information on other SIMATIC NET products that you can operate along

with the devices of the SCALANCE X‑300 product line in an Industrial Ethernet network.

Integration in STEP 7 projects

The current GSDML file must be used for integration in STEP 7 V5.4 SP5 projects. This applies

to all products covered by these operating instructions.
You can obtain the relevant GSD file from the Internet under the following entry ID:
46183514 (

https://support.industry.siemens.com/cs/ww/en/view/46183514

)

You will find the file for the firmware update V3.3.1 for X-300 under entry ID "46183538".

Further documentation

In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial

Ethernet / PROFINET passive network components", you will find information on other

SIMATIC NET products that you can operate along with the devices of this product line in an

Industrial Ethernet network.
There, you will find among other things optical performance data of the communications partner

that you require for the installation.
You will find the system manuals here:
● On the data medium that ships with some products:

– Product CD / product DVD
– SIMATIC NET Manual Collection

● On the Internet pages of Siemens Industry Online Support:

– Industrial Ethernet / PROFINET Industrial Ethernet System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/27069465

)

– Industrial Ethernet / PROFINET Passive Network Components System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/84922825

)

SIMATIC NET manuals

You will find the SIMATIC NET manuals here:
● On the data medium that ships with some products:

– Product CD / product DVD
– SIMATIC NET Manual Collection

● On the Internet pages of Siemens Industry Online Support (

https://

support.industry.siemens.com/cs/ww/en/ps/15247

Introduction

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

Summary of Contents for SCALANCE XR324-4M EEC





















































































Search results

Summary of Contents for SCALANCE XR324-4M EEC

Reviews:

Related manuals for SCALANCE XR324-4M EEC

Brands by name

Popular brands

Siemens SCALANCE XR324-4M EEC, Compact Operating Instructions

Search results

Summary of Contents for SCALANCE XR324-4M EEC

Reviews:

Related manuals for SCALANCE XR324-4M EEC

Brands by name

Popular brands