RF182C communication module
Operating Instructions, 10/2010
101
Technical data
11
Table 11- 1 General technical data
Ethernet interface to the user
Principle
Ethernet
Physical medium
Ethernet (TCP/IP communication)
Duty type
•
10BASE-T Full or Half Duplex
•
100BASE-TX Fast Ethernet Full or Half Duplex
Transmission rate
10/100 Mbit/s
Plug-in connection
M12, 4-pin, D coding
Maximum cable length
100 m
Cable type
STP Cat 5
Autonegotiation
Yes
Autocrossing
Yes
Switch function
Yes, internal
Serial interface to the reader/SLG
Connector
2 x M12 coupler plugs, 8-pin
Max. cable length
1000 m, dependent on Reader/SLG
(2 m = standard length; for other standard cables and self-
assembled cables, refer to Section
Connection cables
)
Connectable readers/SLGs
2x readers/SLG of the RFID families RF300, RF600,
MOBY D/U
Software functions
Tag/MDS addressing
Direct access via addresses
Commands
Initialize tag, read data from tag, write data to tag, etc.
Supply voltage
1)
Rated value
24 V DC
Permissible range
20 V to 30 V DC
Current consumption without
reader / SLG
2)
max. 500 mA; typ. 100 mA
Current consumption through reader
connection
Each 500 mA
Maximum infeed current in the
connection block M12, 7/8''
1L = 6 A
2L = 8 A
Maximum infeed current in the push-
pull connection block
Up to 40 °C:
1L = 12 A
3)
2L = 12 A
Up to 60 °C:
1L = 8 A
2L = 8 A
Galvanic isolation
Yes
