Siemens OptiPoint 410 User Manual Download

Page: 58 / 204

Step by Step

Operating the Telephone with the Display

Using a Multiline Setup

Incoming Call (Ringer or Call Waiting Tone)

The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 rings with the set ring tone

page 99.

If information about the calling party is transferred
(name, number or both), it appears on the display.

You can now lift the handset and talk with the person
calling.

Confirm Answer call

and then lift the handset or use the

speakerphone.

Press the blinking line key before you lift the handset or
before using the speakerphone.

Outgoing Calls

Off-hook dialing

Initiate a call by:

•

Pressing a

free line key

on the multiline telephone

•

Pressing the

Loudspeaker

key

•

Lifting the

handset

On-hook dialing

You can start entering the number immediately. The
connection is established via the next available line.

On multiline telephones, the line being signaled
is automatically selected when you lift the hand-
set. If more than one line is alerting, you are con-
nected to the line that has been ringing the long-
est.

Answer call?

Line

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands