Siemens OptiPoint 410 User Manual Download Page 109

Page: 109 / 204

Operating the Telephone with the optiPoint display module

109

Step by Step

Reject Call

Additionally you can refuse an incoming call. This call is
then stored in the list of "Missed Calls" (

page 138)

and you can initiate a callback at a later stage.

To reject a call, press the "Refuse" icon. The caller hears
an appropriate message.

The telephone reverts to idle mode.

If forwarding has been set up, the call will be forwarded
to the destination for Call forward on busy.

Ringer

If you do not want to be disturbed by the ringing of an
incoming call, you can deactivate the ringer.

If your telephone is in idle mode, select the option

Rin-

ger on

Ringer Off

from the menu. You can also as-

sign the on/off function to a function key (

page 90).

Call Control

Mon 07/03/05 11:34AM

+44 123456 78910

Ringer on

Call Log
Redial Last No.
Do not disturb

Setup

Contacts

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands