Siemens OptiPoint 410 User Manual Download | Manualshive

Page: 3 / 204

background image

Safety Precautions

3

Important Notes

The information provided in this document contains merely general descriptions or charac-
teristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed
in the terms of contract.
The trademarks used are owned by Siemens AG or their respective owners.

Labels

Never operate the telephone in an environment where there is a risk of ex-
plosion.

Only use Siemens accessories. The use of other manufacturers’ accesso-
ries may be dangerous and will render the warranty and approval null and
void.

Never open the telephone set or an add-on unit. If any problems arise, con-
tact your service personnel.

The device conforms to the EU guideline 1999/5/EG, as attested by the CE
mark.

This device has been manufactured in accordance with our certified environ-
mental management system (ISO 14001). This process ensures that energy
consumption and the use of primary raw materials are kept to a minimum,
thus reducing waste production.

All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.

The correct disposal and separate collection of your old appliance will help
prevent potential negative consequences for the environment and human
health. It is a precondition for reuse and recycling of used electrical and elec-
tronic equipment.

For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service, the shop where you
purchased the product or your sales representative.

The statements quoted above are only fully valid for equipment which is in-
stalled and sold in the countries of the European Union and is covered by
the directive 2002/96/EC. Countries outside the European Union may have
other regulations regarding the disposal of electrical and electronic equip-
ment.

«
1
2
3
4
5
...
»

Summary of Contents for OptiPoint 410













































































































































































































Reviews:

No comments

Related manuals for OptiPoint 410

Brand: M-LOCKS Pages: 3

Brand: dbx Pages: 51

Brand: ICMA Pages: 2

Brand: Safeline Pages: 12

Brand: CAME BPT Pages: 8

Brand: Midland Pages: 75

Brand: Optimus Pages: 2

Brand: Dynacord Pages: 2

Brand: Omniflex Pages: 2

Brand: JBL Pages: 10

StorageWorks DS-BA35X-MN

Brand: Digital Equipment Pages: 2

Brand: Solar Energy Pages: 4

Brand: DAB Pages: 228

Brand: Medion Pages: 122

Brand: NA-DE Pages: 18

Scalekleen EV9796-01

Brand: Everpure Pages: 2

Brand: Toro Pages: 6

Brand: QMotion Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands