Siemens OptiPoint 410 User Manual Download

Page: 198 / 204

Appendix

198

Line Key Status Indication

Direct Station Select key Status Indication

LED

Line status

Description

OFF

Idle

No connected calls.

BLINKING
RAPIDLY

Call waiting mode.

A new incoming call/possible callback is wait-
ing.

(1)or (2)

FLICKERING

Held.

A call held in a queue that can be answered by
the multiline telephone.

BLINKING
SLOWLY

Idle (forwarded)

The line is forwarded immediately (prime line
only)

(3)

BLINKS
SLOWLY

Idle (forwarded)

A secondary line is forwarded immediately (Hi-
Path 8000 forwarding)

(4)

Busy (local)

(5)

The line is seized by a connection to the multi-
line telephone.

Busy (remote station)

(4)

The line is seized by a connection to another
multiline telephone.

FLICKERING
WEAKLY

All

The line appears on the display, i. e. it is busy.

(1) In the case of a line for which a call is waiting, call waiting mode is maintained so that infor-

mation on the waiting call remains displayed.

(2) A call may already be connected to the line for which a new call is waiting. This is referred

to as "Call Waiting". The connection can be active or held

(3) The LED indicator on the prime line key indicates immediate forwarding instead of an idle

line.

(4) Only if activated by administrator.
(5) An active call is connected to the multiline telephone. A call is connected to the other tele-

phone.

LED

Line status

Description

OFF

Idle

The line assigned is not used.

Busy

The main line of the target telephone is busy.

BLINKING

Incoming call

An incoming call is waiting on the main line of
the target telephone.

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands