Step by Step
Operating the Telephone with the optiPoint display module
158
Multiline Calls
Display of Line Information in Call Control
This section describes how the multiline Call Control
provides information about the current status of other
lines. This should enable users to toggle between vari-
ous
Call Controls
and to obtain an overview of impor-
tant operating states of lines that are currently not visi-
ble.
This is enabled by the display of lines that have the fol-
lowing states:
•
Active
•
Ringing
•
Held by own phone
•
Call Waiting mode
•
Held by another phone
In the lower part of
Call Control
a
line information
box
appears; it displays the line with the most impor-
tant status in accordance with the following priorities:
•
Active and signalling (for second incoming call) – dis-
played as "Ringing" or "Call waiting".
•
Active
•
Ringing (incoming call, hold ringback or hold ring-
back for pickup group), in the order established by
the rules for selecting the preferred terminal line
(see
•
On Hold (manual hold) on your own telephone in the
order
last on hold
,
displayed first
•
On Hold (manual hold) on a different telephone in
the order
last on hold
,
displayed first.
•
Advisory tone for
– incoming call
– on hold too long (Hold Ringback)
– on hold too long in pickup group (Hold Ringback)
in the order defined by the rules for selecting the
preferred terminal line (see
The states
Ringing
,
Call Waiting
and
On Hold
are only shown for those lines for which the user
has activated
Line information
in
Line settings
.
