Siemens OptiPoint 410 User Manual Download

Page: 41 / 204

Operating the Telephone with the Display

Step by Step

Recording a Call

You can record important calls to be able to supply evi-
dence about the exact wording of an order (e.g. for
banking transactions).

Prerequisite

: The connection to ASC Call Recording

(EVOip) was entered at your telephone by the service
personnel

page 85.

During a call either

press the

Record

key that was set up

select and confirm. The recording is started, and the
display shows

"Recording"

and the number of the oth-

er party. The other party is notified via an audio note
that the call is being recorded (has to be set up by the
service personnel).

Stop Recording

Press the

Record

key

select and confirm. The recording is stopped.

The recording is also stopped if the call is terminated.

Searching for and replaying the calls can e.g. be done
using the widely known ASC applications POWERplay,
WEBplay, or INSTANT WEBplay.

Start Recording?

Stop Recording?

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands